How to make repairs in the apartment. DIY room design

For a person in life, an apartment is the place where he goes after a hard day, where he is raising children, lives with hope for the future and just relaxes, and each of us wants the apartment to be as cozy and comfortable as in a country house. The time comes when it is necessary to make repairs: it can be not only capital, but also budget inexpensive. In order not to hire a construction company, you can start repairing your apartment with your own hands. At the family council, decide on the design of the apartment (both of each of the premises, and in general with the style), invite your child for this. To do this, you can see a photo of the apartment renovation on our website. When the design is approved, it is unforgettable to make a list of materials and the necessary tool. It is better to always take material with a small margin. If you live in a renovated apartment and do not completely expose the furniture from the apartment, then do it in parts, first making repairs in one room of the apartment, then in another. Starting to prepare the walls and ceiling, it is necessary to consider whether the wiring in the apartment will change. This stage is best entrusted to an electrician with experience, as the correct operation of electrical appliances depends on the wiring.
Then we turn to the walls and ceiling: we level it, if necessary, apply a layer of putty and primer. The drying time of the plaster or putty depends on the applied layer, do not forget about this. After this stage we go to the floors, open them, set them according to the level, if necessary - we replace the old boards that have become unusable with new ones or cover the floor with plywood. When repairing a bathroom, start repairing from the ceiling - just like in all rooms of your apartment. Facing, on the contrary, is from the floor. With humidity in the bathroom, you can install a heater. Be sure to check the waterproofing: if it is old and cracked, it is better to replace it.
When repairing an apartment with your own hands, the main thing is to be calm and not rush, otherwise you can "break firewood". Walls in the kitchen can be pasted with wallpaper, tile or install MDF panels. Near the gas stove and sink, it is desirable to wall the tiles. This is all possible to do on their own, as in the photographs in our articles. It is better to entrust the dismantling and installation of window blocks and double-glazed windows to a company specializing in this type of work. If the repair takes place in frosty weather, the installation of the units is carried out within two hours, so the heating system will not be able to defrost.
As you know, this is only a brief and superficial review of the repair of an apartment with your own hands. Each stage of self-repair should be prepared very carefully and step by step, more detailed tips with photos and videos can be found in the thematic articles on our website. The choice is yours, do the repair of the apartment with your own hands or hire a construction team.

A good repair can make even the smallest apartment more comfortable and attractive. It is more convenient to order repairs in the company, but not all apartment owners have the necessary means to contact professionals. Moreover, the do-it-yourself work of many people is attractive because it allows you to creatively approach the arrangement of space in the house.

Types of Repair

Repair can be of two types:

cosmetic;
capital.

Cosmetic repair involves replacing wallpaper, installing a new floor, painting surfaces. This also includes the application of decorative plaster. Most apartment owners do just that. Major repairs are more complicated in execution. The owner will have to replace not only the coatings of the walls, floor and ceiling, but also pay attention to the quality of the plumbing, pipes, window double-glazed windows and interior doors. As part of a major overhaul, it is also convenient to redevelop the apartment. Sometimes such a redevelopment can completely change the appearance of the premises.

Where to begin

Before making repairs in the apartment, it is, of course, necessary to decide what type of repair to carry out. In new buildings, for example, often have to do major repairs. The same goes for very old apartments, where communications, doors and windows leave much to be desired. As for the average apartment, where pipes have already been replaced and new windows have been installed, then usual cosmetic repairs will most likely be appropriate here.

After the type of repair is selected, you need to record all the necessary work that will have to be done. This must be done in order to calculate the amount of materials that will have to buy. Experts recommend purchasing materials in advance. This will allow the owner of the apartment to save. After all, if he will buy all the materials in one store, then he will certainly be given a discount. And during transportation you do not have to constantly spend money on a car.

It is better to buy some types of materials with a margin. For example, this applies to wallpaper, tile and laminate. Laminate need to be purchased exactly one pack more than necessary. Otherwise, the material may not be enough, and then buy exactly the same, it is not always possible.

Beginning of work

Repair work begins with the dismantling of old coatings and communications. Previously, it is better to take out all the things from the apartment. However, if the family plans to live in the apartment during the repair, then you should consider how to make life during work more convenient. If the apartment has several rooms, then repairs can be carried out in turn in each of them.

The most difficult types of work during overhaul are replacing pipes and wiring. These works require a certain competence, because improper installation of water communications, for example, can lead to a real catastrophe. Such repair errors may not immediately appear. But after a while they are able to destroy all the work.

Some masters wonder what kind of work to start. Often disputes arise as to whether to first lay wiring or repair pipes. In fact, you can start with any job. The main thing is that these processes always go before decorative finishing. If a redevelopment is planned in the house, then you need to start the process with it, and only then take up the installation of communications.

Stages

At the first stage, redevelopment works are carried out. The whole process is carried out according to preliminary drawings. By the way, the master should have drawings of different stages made in advance.
After the redevelopment has been carried out, you can start replacing pipes and wiring. Also at this stage, insulation and soundproofing of the walls is done.
When communications are laid, the house often looks like after a pogrom. Because the strobes in the walls, the destruction in the floor and the roughness of all surfaces immediately catch your eye. Before proceeding to the cosmetic part of the repair, it is necessary to level the surface. If desired, windows and doors are also being replaced at this time.
Decorative repairs start from top to bottom. This is necessary in order not to spoil the finished surfaces. Therefore, in the first place, often they either paint the ceiling or finish the walls. If you plan to do a stretch ceiling, then the repair begins with the walls.
After the wallpaper is pasted and the decorative plaster on the walls has dried, you can lay a new floor. It must be remembered that the new floor, especially if it is bulk, needs peace. He cannot be disturbed for a while. It’s better for the owner to move to another place.

Some novice masters wonder what premises to start repair work from. Cosmetic repairs can be started from any room. For example, you can conduct it in each room separately. After that, the master can proceed to such rooms as the kitchen and bathroom. True, this method may seem uncomfortable to someone. After all, it’s much more familiar to first wallpaper all rooms with wallpaper, albeit different, and then take on flooring.

If the owner is going to live in the apartment during the repair process, he is better off working on each room separately. It is advisable to entrust some types of work to professionals. We are talking about installing windows, installing wiring and installing interior doors. Separately, it should be said about the bathroom. Repairing in this room is much more difficult than anywhere else. Specialists, by the way, charge more for decorating a bathroom than for decorating a shower or kitchen. Because the process itself is very laborious.

Another point where a professional may be required is related to the design of the apartment. Not every owner is able to create a professional design. A well-designed design project often allows you to expand the rooms and make them more spacious, and not only visually. Also, high-quality interior design makes the atmosphere in the rooms harmonious. If the owner is confident in his abilities, then the design part should also be planned in advance.

do-it-yourself gypsum ceiling (step by step instructions);

Video

See how you can make an apartment renovation with the whole family:

Thanks to this video, you will know how to make repairs in the apartment so that the money remains:

If repairs are needed and finances are limited, you have no choice but to do the repairs yourself. However, you should not despair, it’s quite possible to make repairs yourself, without involving specialists.

So, casting aside doubts, we set about repairing. The first thing to think about is its future appearance.

Choosing and discussing with your family the future interior, you can begin to draw up estimates. It should include all necessary for repair construction, decoration and consumables, as well as tools.

Some tools can be saved by renting them. And indeed, you will not begin to buy an expensive hammer drill, if you just need a dozen holes in the walls to mount the shelves!

Having bought the necessary materials according to the estimate (mentally prepare yourself for the fact that you will have to buy additionally), you can proceed directly to the repair work.

Preparatory stage

Dismantling the trim

Preparation for repairs will differ depending on a number of factors:

condition of the apartment;
capital repair;
desired result.

Naturally, the wider the front of the planned work, the larger the preparation. For major repairs, we dismantle all finishing materials.

We scrape off old wallpaper with a metal spatula, after soaking them with water from the spray gun.
To clean the walls of oil paint, iron them with an iron through the foil, so the paint is softened and removed with the same spatula.
We chop off old tiles from the floor and walls using a punch.
Blur whitewash.

As a result, we should have bare walls and floor (or concrete screed in satisfactory condition).

Pipe Replacement

After we have finished the decoration, we proceed to the plumbing work. If we decided to completely replace all the plumbing, at this stage we will have to replace the risers of water supply and sewage, and this must be done quickly enough. After the risers are replaced, you can gradually change the pipes.

At the same time, heating batteries can be replaced.

Stages of preparing surfaces for decoration:

On the floor, if his condition requires this, we put a fresh leveling screed. In the bathroom and toilet under the screed we mount a layer of waterproofing materials.
We putty the walls with finishing putty, and if their curvature is significant, and only then we putty. Similar work is being done on the ceiling.
Dry plastering is also possible - wall sheathing with sheets of drywall. In this case, the walls themselves are best treated with antiseptic materials, eliminating the likelihood of fungus formation under the layer of drywall.

Note! Sheathing the walls of the bathroom and toilet with drywall (even moisture resistant) is undesirable!

Finishing work

After the preparation is completed (the floor screed and putty are completely dry, the walls and ceiling are aligned), you can proceed directly to the finish.

The main thing that you should remember when doing repairs with your own hands, the sequence of repair work looks like a "ceiling - walls - floor" and nothing else.

Ceiling decoration

The traditional and cheapest is whitewashing. The price of consumables for the whitewash is low, whitewashing is easy, but today we can safely say that this method of decoration is outdated.

Alternative whitewash:

Painting the ceiling with interior paints.
Wallpapering (for painting).
Ceiling decoration with decorative stucco (here it is possible to use both stucco tinted in bulk, and white stucco with subsequent painting).
Pasting the ceiling with special polystyrene tiles.

One of the best finishes today is the installation of a stretch ceiling. We will not describe all the advantages of such ceilings, we will only say that to complete the work you will have to turn to specialists for help, you are unlikely to succeed in installing the suspended ceiling yourself.

Wall decoration

There are also a large number of options for wall decoration. To decide on the design, we recommend that you look for appropriate examples, DIY repair will be much easier if you clearly present the desired result.

Consider the finishing options that you can do yourself.

Wallpapering the walls is the simplest and most common finishing option. Thanks to a wide range of products, you can choose the right wallpaper for any design decision.

On pre-aligned walls, you can easily paste wallpapers, even if you don’t have much experience. Cork wallpaper can be singled out as an environmentally friendly and very presentable finishing material.

Another option is painting the walls. Today, the market offers a fairly wide range of interior paints, including the so-called structural. Such paints allow you to achieve an interesting effect of a heterogeneous surface, which means that the painted walls will look really unusual.
A universal finish - decorative (textured) plaster. Having applied to the prepared leveled wall, we immediately, without waiting for it to dry, form a texture.

Note! Depending on the tool used and the technique of forming the relief, the texture is different, so decorative plaster represents a very wide scope for your design imagination.

Floor finish

The option of finishing the floor also depends on your budget, the general idea of \u200b\u200bthe design and on the desire to cope independently with all the stages of repair.

The easiest way to finish the floor - laying linoleum. Even an inexperienced master is able to cope with this task, the main thing is to choose linoleum correctly and not to forget about the substrate, which performs the function of thermal insulation and amortization.
A laminate is an alternative to linoleum. Modern models of laminate flooring allow you to assemble the floor like a designer, so with proper dexterity, you can lay it down without involving external masters.
In the children's room, the cork floor will look good, which is laid on the principle of a laminate, snapping "into the castle."
For the bathroom, hallway and kitchen, floor tiles made of ceramics, porcelain stoneware, natural or artificial stone are suitable.

Naturally, these are only the main points that you may encounter when deciding to make a beautiful repair yourself. In fact, there are much more nuances in such a difficult matter. And yet, we are sure that if you seriously get down to business, you will surely succeed!

To summarize

We hope our article was useful to you. In order to more accurately understand the technological and practical issues, our website provides detailed photo and video instructions in which you will find useful information on this issue.

How to make repairs in the apartment? Phased sequence of work. Those who decided to overhaul the apartment need to solve many questions: where to start, when to change doors and windows, glue wallpapers, lay tiles, etc. How to avoid mistakes when independently carrying out repair stages of work? Choose the right one.

The sequence of repairs in the apartment involves the decoration of the ceiling, walls, tiles are laid in the bathroom, kitchen, toilet, flooring is laid and the cassettes are mounted. Only then are the external parts of sockets and switches installed.

Where to start the repair?

1. Dismantling

Where to start the repair in the apartment? It will be correct to remove all the elements of the old repair, remove the wallpaper, tiles, decorative plaster elements, remove unnecessary drywall constructions. Lastly, it is necessary to dismantle the flooring, and if it does not change, then cover the floor with a thick oilcloth and put cardboard on top.

2. Communication layout

At this stage, the replacement of engineering systems. Starting from:

sewers;
cold and hot water supply;
heating and ventilation systems;
welding works;
displacement of the risers;
replacement of wiring.

And ending with the installation of new plumbing equipment.

The features of the repair at this stage are that the sockets need 20-80 cm from the floor, the switches are 1-1.5 meters (individual measurements are possible, depending on the wishes of the residents), in the bathroom only with double insulation and the use of protection. Wires are laid strictly vertically or horizontally in order to understand their location in the future. It is advisable to place in special corrugations.

Do not lay a television cable with a telephone in one pipe, there may be interference and other sound reproduction errors. Only an experienced telemaster can guarantee proper cable routing.

When installing plumbing, it is important that all joints and connections are firmly fixed, it is better to check a hundred times than to eliminate the consequences of the flood.

3. Carrying out draft and installation works

The complex draft work includes:

alignment of walls and ceilings;
installation of windows and doors;
screed floors.

First, the base for flooring is leveled. After final drying of the screed, you can take care of mounting the structure for installation and after it is installed. The most commonly used cement-sand screed or bulk floors. The screed is very strong and durable. Calculate the amount of material for the screed will help.

Remember that the floor after pouring must be dry for subsequent work.

4. We whiten, paint and draw

FROMthe most time-consuming and lengthy are the plastering and painting work, which is immediately carried out in all rooms. The duration of this phase of apartment renovation in a new building is explained by the features of the technological process. The putty should dry well, and this is a day or two for each room. Applying decorative materials is required.

To carry out the following steps as a primer, putty, painting, wallpapering, only after the base has dried.

5. The arrangement of the kitchen and bathroom

This stage includes welding, gating, mounting brackets, installing taps and wiring for the heated towel rail. Pressure testing heating system. When installing electrical wiring, grounding is performed. We check and lay.

6. Laying tiles in the bathroom

It is better to start repairing the bath after dirty work in the apartment. At this stage, the tiles are mounted on a aligned plastered, primed surface, we waterproof the surface. Thanks to what we improve adhesion and tile adhesive is saved. Upon completion, a false ceiling is installed.

Use old plumbing during construction work.

7. Floor laying

Installation of the flooring is carried out after the previous step is fully completed. After this stage, you can safely or perform various. Next, the door is installed on the prepared hinges, skirting boards are put on, sockets and additional accessories are put on.

Be sure to monitor the humidity and ventilation in the apartment, in order to avoid the appearance of cracks in the ceiling of drywall.

You can arrange furniture and celebrate the completion of repairs, a pleasant housewarming!

Features of room repair. What should you pay attention to?

What room to start the repair in the apartment? It is important to highlight a certain priority for each room. If you follow the logic, the principle is as follows - first the bathroom, toilet, kitchen, and then the bedroom and living room. The corridor remains in the end, because this space usually serves as a warehouse for building materials.

A significant drawback of such a repair is that dirt and dust will fall into the finished premises, and therefore you will have to wash it all the time and tidy up the new room decor elements.

Attention: When arranging residential premises, it is important not to forget about. This is important both for the bedroom, the nursery, and the living room, where noisy gatherings will take place.

Do not save on flooring, windows, doors and finishing materials, because the quality of the work performed will depend on this.

How to make cosmetic repairs in the apartment, depending on its area?

A few principles for proper repair:

work should be done from top to bottom, from ceiling to floor;
sequence - from dirty to clean;
redecorating in a two-room apartment is done from the back room, moving towards the front door, the finish is a balcony or a loggia;
in a one-room apartment, it is better to start repairs from the kitchen, because it is here that you will need to do the bulk of the repair work.

If you bought an apartment and do not know where to start the repair, then the first step should be to rid the room of everything unnecessary, including furniture, wallpaper, facing materials. All defects, cracks, potholes must be brought into proper form and only after that proceed with the decoration of the room.

Now it has become fashionable to paint walls, which allows you to update all rooms in a short time, the mixture is applied easily and simply, and if you add a picture or graphic image, then you will get a real masterpiece from which you will not be able to look away. You can calculate the right amount of materials for free by ours.

DIY room design

When all the repair work is completed, it's time to think about arranging the home, to pick up furniture, designer jewelry and various devices. In a small room it will be correct to use the built-in furniture, if possible folding beds, in order to free up more space.

Visually enlarge the room with mirrors that can be placed on the walls, ceiling, make interesting combinations with light. The more massive the decorative fixtures, the more the apartment will look larger and more spacious.

But in a large apartment you can experiment, combine styles, choose different colors for painting and decorating, design various lighting solutions. Shelves for books, shelves for dishes, stools can be made independently using improvised colors.

It will look unusually artistic painting on the wall, or suspended ceilings with photos or other interesting ornaments. Your apartment is an embodiment of the inner world, individuality, creativity and a riot of fantasy. Let each room be not only a household item for you, but also remind you of the wonderful moments of every day, give coziness, comfort and bliss.

Hurry to make repairs with your own hands and delight relatives and friends. Yes, this is a difficult matter, but if everything is done gradually, guided by the advice of professionals, then all the chores will be on your shoulder. Dare, everything is in your hands!

Many people are wondering about how to make repairs with their own hands, and many even take on its real implementation. Some of them, recklessly rushing into the “battle”, stop halfway from the lack of practical and theoretical knowledge, and another part, although it brings the repair to its logical conclusion, is still not satisfied with the final result.

All this happens mainly due to lack of time and knowledge, because for the most part an ordinary person plans
his repair for the holidays or even worse counts on evenings and weekends
days. This is not the right approach to solving the problem - high-quality repair in
short deadlines can be done by an exclusively competent specialist with
a sufficient amount of knowledge and time, in the arsenal of which there is all
necessary tool. Otherwise, the result is only one - either the repair is done on a "tyap-blunder", or stretched for an indefinite period.

Well, have you changed your mind about doing repairs yourself? Then it’s time for you to find out how professionals approach the solution of the housing problem, how they make repairs in residential premises - this is exactly what awaits you.

The principle and sequence of repair of a residential apartment

If you decide to make repairs yourself on the principle of “each room is separate”, then this will not lead to anything good. It often happens that while the circle is closed and the repair in the last room of your apartment is completed, the decoration of the previous rooms will require new repairs. For the most part this happens due to the wrong choice of the sequence of rooms being repaired.

Do not start the repair with such rooms as bedrooms, a hall, and even less a corridor. It’s best to start with impassable rooms, where the probability of damaging the finish with relocated building material is the least. Personally, I would start repairing a residential apartment with a toilet, bathtub, kitchen and balconies - as a rule, the finishing materials used in these rooms are the least susceptible to spoilage and harmful dust, and in case of damage they are easily brought back to their original state with a simple wet cleaning.

The next step in such repairs should be the dead-end rooms: bedrooms and, possibly, a living room (unless, of course, you have a walk-through). And finally, we leave the so-called "walkers" (corridors, through rooms) and the hallway.

Now you need to deal with some types of work that is best done immediately in the entire apartment - this approach to them will allow you to get rid of many troubles during the repair process, including endless dirt. Take, for example, floors, or rather screed - in this regard, it is better to do it immediately and everywhere. Let this process take you more than one day, but then you will not take sand and cement dust to all rooms.

As for the replacement of electrical wiring, it is also better to produce it, as they say, in one fell swoop throughout the apartment. But it is possible in parts, only in this case it is necessary to combine the work of the old and new wiring diagrams. But the advantage of this approach to the issue
replacing old wiring is the complete non-volatility of each room from each other. One single junction box, hidden under the ceiling of drywall or in the wall, is connected directly to the apartment electrical panel and is equipped with an individual circuit breaker. No confusion from the wires - there is nothing easier and more understandable for a person with minimal knowledge in the field of electricity. So if you seriously wondered how to make repairs yourself, then this approach to replacing electrical wiring will be optimal for you.

Door installation also belongs to the category of work that is best done in one go. After you finish the repair in one of the rooms and install new doors in it, supposedly so that dust does not penetrate there, you are very at risk of spoiling them even before the completion of the repair in the whole apartment. Better leave the old doors, at least they are not a pity - and transfer the installation of all interior doors to the final stage of repair.

If you are ready to endure inconvenience to the end, then pasting the walls with wallpaper and painting ceilings is best done at the very end immediately in the entire apartment. Why? The answer to this question is dust. No matter how you clog the repaired room, it is simply impossible to completely protect it from dust from other rooms.

So, let's summarize how to make repairs with your own hands in a residential apartment and at the same time keep it in its original form. In the sequence described above, we repair all the premises of the apartment: fill the screed, level the walls, and mount the ceilings. Essentially, only a bath, a toilet, a kitchen (provided that it does not have wallpaper and painted ceilings) and balconies can be fully repaired. In all other rooms we reach the stage of finishing (painting ceilings and wallpapering) and stop. We will do the rest in one go, when the dusty work completely stops in the apartment, in particular, putty and its subsequent cleaning - this process is the most dusty throughout the repair.

How to save on repair?

Asking a question about how to make repairs with your own hands, a person aims to reduce financial costs - by refusing the services of professional craftsmen, you significantly reduce the budget for repairs, but at the same time take full responsibility for
final result. And since you have taken this step, you should know that there are additional ways to reduce the cost of repairs.

(You can read about how to learn how to save your money in the article “How to save money. 5 working methods”)

Oddly enough, the right choice of building materials will help to further reduce costs. The fact is that in addition to well-known and world-famous manufacturers of building materials, there are quite a lot of enterprises that produce similar products, which are practically in no way inferior to their more expensive counterparts. Take, for example, the products that the Henkel brand produces - their products are of high quality, and it costs pretty well. You can replace it with a cheaper analogue of Moment, which, by the way, is produced by the same Henkel, but it costs almost an order of magnitude cheaper - it is a budget option for the products of this company, designed for less affluent consumers.

In general, the task is to purchase not cheap low-quality goods, but high-quality building materials not yet developed on manufacturers' construction markets - often such goods are stored in warehouses, and sellers will only be glad to get rid of them by offering you them at discounted prices.

Another option to save on the purchase of building materials will require you some free time spent looking for a supplier. It's no secret that in large cities, in addition to large construction hypermarkets, whose products are not of special quality, there are many wholesale and small wholesale warehouses where the cost of building materials is much lower. It’s worth looking for such warehouses for several hours of valuable time to buy building materials cheaper than everywhere else. And if you try hard and buy material from them immediately for the entire apartment in full, then you can additionally get a 5-10% discount.

Repair Tool

Naturally, repair, whatever it may be, cannot be done with bare hands, for this you will need a tool - a lot of all kinds of manual and electric tools. Therefore, coming close to the question of how to make repairs with your own hands, you need to be ready to purchase it in full. A lot of money will be needed for this - there can be no question of renting;

To make it clearer, on what principle to approach the issue of choosing a high-quality tool, we will conduct a short excursion into the assortment of tools sold in our stores. There are three types of tools: household, semi-professional and professional. What is the difference between them? In the cycle of work and rest. The entire household power tool is designed for a five-minute cycle (five minutes of work - ten rests), while the professional tool is more durable and able to work continuously
several hours in a row. Something in between is a semi-professional tool - it is designed for a maximum of half an hour of continuous operation. It is on it that it is worth stopping your choice - the price of such an instrument is not very high and, with proper handling, it will be enough to complete the repair.

What should not be purchased is a tool that is sold in sets — as a rule, in a set consisting of several tools, only one passes a survival test, all the others “die” without working for five minutes.

The choice of a hand tool can be treated less scrupulously - there’s practically nothing to break there and it costs mere pennies. If you really need to be selective about something, it’s a measuring tool. No, it’s not about roulettes - asking yourself how to make repairs yourself, you should understand that in addition to roulette you will need all kinds of levels (rack, hydraulic, maybe laser), squares and even a pair of compasses and a protractor. It all depends on what you swung in the repair process - if we are talking about serious drywall constructions, then to create them you will need a lot of different meters.

In general, to summarize, each individual type of repair and construction work requires a special tool, which, by the way, will be gathering dust somewhere in the most remote corners of your apartment when the repair is completed. Therefore, the best option for you is not to purchase a tool, but to borrow it from friends and acquaintances.

In general, if you want to see your apartment in the best traditions of European-quality repair, it is better to abandon the idea of \u200b\u200bmaking it completely independent. And if the question is precisely in a small budget, then the best approach to resolving this
problems will be repaired with partial involvement of specialists. You can do it yourself dismantling - do it, overpower the floor screed - forward without thinking, but if you feel that, for example, you may have difficulties with tiles, then it is better to seek help from specialists. It is this approach to the question of how to make repairs with your own hands that will bring you the most desired results.

Sergey Stroykin