Hand-held circular saw for table mounting. A detailed description of making a table for a circular saw with your own hands, which will be useful in any workshop

A circular saw is a productive, convenient and maneuverable tool with which various construction and finishing works are carried out. If you need to perform large volumes of tasks, working with a manual circular saw is quite difficult. In such situations, a circular saw table becomes an excellent assistant. You can assemble it yourself from boards and plywood. The saw itself will be placed at the bottom of the tabletop, and the toothed blade will fit into the slot. The saw turns on, the disk begins to rotate, lumber is fed and sawing occurs. If you wish, you can assemble an excellent table for a circular saw with your own hands. There is nothing complicated in this work.

It is difficult to work with large volumes of wood with a regular circular saw, so it is better to place it on a table.

Circular saw table design

Before assembling a circular table with your own hands, you need to carefully consider its design. At this stage, your task comes down, first of all, to calculating the load that will be placed on the table in the future. When assembling a saw table with your own hands, consider the power of the unit. Thus, for high-power industrial tools, it is recommended to use a reinforced steel welded structure. In the case of a home saw, there is no need for such a powerful design. It will be enough to assemble a saw table with your own hands from boards and plywood.

When planning to make a saw table with your own hands, you need, as already noted, to take into account the power of the tool. In home workshops, saws with a power of up to 800 W are most often used. At the same time, it is necessary to take into account the frequency and volume of work performed. For example, when building a house you will have to cut much more material than under any other conditions. Experts do not advise buying saws more powerful than 1200 W for your home. In the case of a home workshop, this simply does not make sense.

The higher the power of the circular saw and the higher the volume of work performed, the more reliable, durable and stable the table you create should be. Professional-grade circular saws are installed on bases made of metal profiles. In some cases, such tables are even embedded in the floor, since vibration may cause the operator to briefly lose control of the saw, which will be enough to cause injury. Creating such a table requires certain skills in working with special tools, welding, etc. Assembling an ordinary wooden table for a home saw is accessible to almost every person, even if he does not have such experience.

Preparing to assemble the table

Table assembly diagram.

The simplest version of a table for a circular table is a structure made of fairly thick plywood and boards. In this case, plywood will be used to make the countertop. The tabletop itself will be stationary. The tool needs to be installed under it. First, a slot is created in the lid along which the saw blade will move.

Choose the dimensions of the table, first of all, based on yourself. You should be comfortable and comfortable working. The instructions cover the average and most common sizes. You can change them at your discretion. The height of the table is 1-1.15 m. Choose the length taking into account the nature of future work. If you often cut long boards, the table top should also be made long enough. If the length of the tabletop is more than 2 m, it is recommended to equip the structure with an additional pair of support legs. Without them, the table will vibrate strongly.

The thickness of the plywood used to make the tabletop should be from 5 cm. Plexiglas and fiberglass are suitable for the same purpose. Craftsmen recommend refraining from using chipboard due to the insufficiently high strength of the material.

The lid is polished and varnished in several layers. Thanks to this, the required sliding of the processed materials will be ensured. The best option is to attach a metal sheet to the tabletop. This will increase the reliability of the surface and extend the service life of the product as a whole.

Materials and tools for work

A table for a circular saw requires the presence of guides, which will ensure higher accuracy in cutting materials. The guides are made from a metal corner. Clamps are usually used to secure them to the tabletop. It is not recommended to make the guides stationary. It will be more convenient if you can change their position in the future.

Prepare materials for self-assembly of the table:

1. Plywood. If you wish, you can use a different material for the countertop.
2. A metal sheet.
3. Beam 50x50 mm.
4. Board 50x100 mm.
5. Clamps in the amount of 2 pcs.
6. Metal corner for making guides.

Pre-gather all the necessary tools:

1. Hacksaw. If possible, it is better to use a jigsaw instead.
2. Screwdriver.
3. Electric drill.
4. Hand cutter or machine. If you don't have them, you can do without them.
5. Tape measure and ruler for measurements.
6. Square.

After preparing all the tools and materials, you can begin assembling your homemade table. Some craftsmen use old dining and kitchen tables for this. But you shouldn’t count on great durability of such products. It’s better to do everything yourself, “from scratch.” This way you can assemble a comfortable table that fully meets your needs and requirements.

Step-by-step instructions for assembling the table

Table of circular saw made of steel plate.

First you need to form the tabletop. Take a plywood sheet and make markings. The edges of the sheet should match the two edges of the lid. Cut out the workpiece with a hacksaw or jigsaw. If desired, process the cuts with a router. This is optional, so you can skip this step. In the case of a circular saw table, reliability is more important than good looks. Roughly sand the countertop using sandpaper.

At the bottom, prepare a slot for the disk. Measure the circular saw blade. To make it as convenient as possible, remove the saw blade from the tool and simply circle the required part of the saw.

After completing the arrangement of the seat, try on the slab and make the required adjustments. Mark the slot locations for the saw blade and fasteners. If the disk must rise and fall, the table must be equipped with a pendulum mechanism. In this case, the shape of the slot should look like a truncated pyramid. The top of this kind of pyramid needs to be directed downwards. To make the frame of the lifting mechanism, it is better to use metal corners welded to each other.

Assembling the frame and installing the legs

Table guide carriage for circular saw.

Next you need to make markings for the transverse and longitudinal slats. In the case of such a table, they act as stiffeners. Do it from the wrong side. The planks are made from timber. You need to prepare 2 longitudinal ribs. Select the length based on the length of the tabletop. It is enough to simply subtract 8-10 cm from it on each side. There should also be 2 transverse strips. To determine their length, subtract 8-10 cm from the width of the tabletop on each side.

Prepare sockets for self-tapping screws. The slats are fixed so that the lid protrudes about 8-10 cm beyond the edges of the frame. It is important to make the most reliable and durable fastening. Install the first self-tapping screw at a distance of 4-5 cm from the edge of the rail. The screws themselves are mounted in increments of 20-22 cm. The parts must be drilled through. The screw heads must be completely recessed into the tabletop material.

The transverse ribs are attached first. To ensure maximum reliability of the table, you must first coat the edges of the slats with wood glue. Tighten the structure with clamps and secure with self-tapping screws. Leave the table cover until completely dry, then install the longitudinal slats in the same way. Pull together the frame parts and install several fasteners on each side. After this you can remove the clamps.

To make the legs, use bars. The height of these elements is selected individually in accordance with the height of the operator. It is more convenient when the tabletop is located at hip level. Before installing the legs, plan them on one side so that the processed side goes to the corner. As a result, the base of the leg will have a slightly larger area than the top.

It is best to use metal corners to secure the legs. You need to slightly press them in so that the base of the homemade table is positioned at odds. Thanks to this, the bed will become more stable. Fastening is done using bolts and washers. They need to be installed with their caps facing outwards. If installed differently, you may be injured by the protruding fasteners during operation.

This will make the design even more reliable. The slats should be installed in pairs on the sides of the homemade table.

Thoroughly polish the surface of the countertop and cover it with several layers of varnish. Instead, you can use small screws to secure a smooth metal sheet.

Finally, the circular saw is installed in its intended place. Additionally, you can apply markings to the surface of the tabletop, which will facilitate smoother and more correct processing of the material being cut.

The control elements of such a machine must be placed on the outside of the tabletop. Usually they are fixed on some table leg. Completing this step of the job requires some electrical installation skills. If they are absent, it is recommended to contact an appropriate specialist.

Thus, there is nothing difficult about assembling a table for a circular saw yourself. This does not require much time or money. You will spend much less on materials than on a ready-made factory table, and the quality of the product, if you follow the instructions, will be no worse. Good luck!

A circular saw is a convenient and productive tool for construction work, with high productivity and maneuverability. But when cutting large quantities of lumber, working with a powerful circular saw is quite difficult. A DIY circular saw table can greatly facilitate this task.

An easy-to-make table can be made from plywood and boards. A hand-held circular saw is installed from the bottom of the tabletop, and its toothed disk is located in a slot in the tabletop. After turning on the saw, the disk begins to rotate, and as the lumber is fed, it is sawed. The maximum thickness of the processed lumber depends on the size of the blade and the power of the saw. When choosing a tool, you must take into account the thickness of the tabletop to which the saw is attached below.

How to choose a circular saw?

If you do not already have this tool and are planning to purchase one, you should consider the following characteristics when choosing:

1. Unit power. For a household tool, 800 W of power is sufficient, but if you are thinking about making a table for a circular saw, then the volume of work with lumber will be significant. You are better off choosing a model with a power of 1200 watts or more.
2. Depth of cut. The maximum thickness of the processed material depends on this parameter. Professional or semi-professional hand saws usually have a cutting depth of 40 to 70 mm, which is quite enough for processing boards and plywood. Please note that the standard depth when installing the saw into a table will decrease by approximately 10 mm.
3. Rotation frequency. The higher the rotation speed, the cleaner the cut - this rule applies to cutting hard materials. However, too high speeds are not suitable for plastic - due to the heating of the disk, it will begin to melt. Therefore, choose a model with a rotation speed of 3000-4000 rpm or with continuously variable speed control.
4. Location of controls. When installing the saw on the underside of a tabletop, access to the on/off button must be safe. Otherwise you will need to provide an external control circuit.

Necessary materials

When making a table for a circular saw with your own hands, you will need woodworking skills and the following tools:

• Hand-held circular saw;
• A sheet of plywood with a thickness of at least 20 mm;
• Board 50x100 mm;
• 50x50 mm block for legs;
• Drill, screwdriver, jigsaw, hand router;
• Wood glue, screws;
• Wood varnish;
• Clamps;
• Ruler and pencil.

The dimensions of the table largely depend on the length of the materials being processed - the cut is much more accurate and smooth when the entire workpiece rests on the plane of the table. At the same time, an excessively large table size clutters up the workspace, so it is necessary to find a middle ground. It is better to choose the height of the table individually, depending on your height.

Manufacturing technology of a table for a circular saw

1. The tabletop is prepared from 20 mm plywood according to the selected dimensions. Mark the plywood sheet using a pencil and a carpenter's ruler, saw it using a jigsaw and mill the edges. The resulting workpiece is sanded. Markings are made on the underside of the tabletop for a circular saw. To do this, turn the tabletop blank over, install the saw without a disk in the intended place and mark the dimensions of the sole. Using a hand router, select a recess of 8-10 mm in the tabletop according to the marked seat.

   

2. They try on the saw, adjust it if necessary, and then mark the places of its attachment and the slot for the toothed disk. If you plan to cut the material at different angles, take this into account when marking the slot - it will have a cross-section in the form of a trapezoid with the top down.

   

3. On the underside of the tabletop, using a pencil and a ruler, mark the stiffening ribs to which the table legs will later be attached. The stiffening ribs are made from 50x100 mm boards and are placed around the perimeter at a distance of 7-10 cm from the edges of the table. Place the board on the table top and trace it on both sides, after which its central line is marked using a ruler, and the location of the screws is marked on it - 5 cm from the edge of each edge and 15-20 cm along its entire length. Drill holes through the markings.

   

4. Mark the boards for the longitudinal stiffeners and saw them. Attach it to the tabletop using wood glue, pressing it with clamps. After this, the side stiffeners are marked in place, sawn and glued in the same way.

   

5. After gluing, without removing the clamps, pull the structure with self-tapping screws along the holes made, having previously drilled them from the outside so that the heads of the screws are completely recessed into the tabletop.

   

6. Tighten the stiffeners together using two 50 mm screws on each side. Remove the clamps. The finished tabletop looks like this.

   

7. The legs for the table are made of 50x100 mm boards. The height of the legs should ensure ease of work, on average it is 100-110 cm. The board is cut along the longitudinal axis at a slight angle on one side. Try them on the countertop so that when installed they stand slightly apart. The legs are fastened to the outside of the stiffeners with bolts. To increase stability, you can make ties from a 50x50 mm bar.

   

8. Install a hand-held circular saw into the prepared groove on the underside of the tabletop, securing the base to the bolts, and insert the toothed disk into the slot.

   

9. You can apply markings to the table to make cutting the material easier. In order to protect the table from moisture and facilitate the sliding of lumber, it is recommended to coat it with several layers of varnish.
10. It remains to resolve the issue of turning the saw on and off. If you have sufficient knowledge in electrical engineering, you can bypass the power key and move the control buttons to the outer surface of the front stiffener. If this circuit seems too complicated to you, it will be enough to simply tighten the key with a wire and turn the saw on and off using the power cord.

    

11. The table design shown is quite simple, and anyone can handle its manufacture. If you want to expand the functionality of the table for a circular saw and increase its safety, you can make the design more complex, as shown in the video.

Thus, as you can see, making a table for a circular saw with your own hands is a simple task that any summer resident can do.

Video - making a table for a circular saw

A circular saw is used to cut wood.

Using a hand saw is not always comfortable; using a table allows you to make the sawing process smoother and more accurate.

The cutting base has a disc-like plane equipped with an outer edge with teeth. There are models not only of the manual type, but also with the ability to be fixed on the table.

It is difficult to work with large volumes of wood with a regular circular saw, so it is better to place it on a table

There are several ways to acquire the latter for ease of manipulation. You can build a table for a circular saw yourself, strictly following a certain pattern.

Table arrangement for a circular saw

The table is made taking into account the fact that the hand tool will be installed and secured on the table, thereby turning into stationary equipment

Constructing the element with your own hands allows you to make the saw most suitable for individual conditions. There will be no difficulties in the process if you carefully study the issue. You can adjust the product to the desired size, distribute everything so that it is convenient for you.

Making a table for a circular saw is within the capabilities of every craftsman.

A handcrafted model will be one of a kind, which makes it unique.

Small table stand for circular saw

Deciding on design and construction

The simplest version of a table for a circular table is a design made of fairly thick plywood and boards

The base can be made of wood or metal. Leaf tree species are chosen for the tabletop. A special hole should be made in it for the disk. The key property of the created table should be convenience.

Circular machine bed

Care should be taken to ensure its stability. No loosening is allowed, otherwise it will negatively affect safety. The tabletop should have as smooth a surface as possible. This will reduce the likelihood of injury while working.

A table for a circular saw requires the presence of guides

The structure can be supplemented with a special riving knife. He can be removed. It is equipped with a special disk protection that allows you to get rid of chips flying at the worker.

Table guide carriage for circular saw

Some people remove the factory cover and replace the factory platform with a homemade one. If you are not going to cut at an angle, you can remove the parts that adjust the tilt of the blade.

Blueprints

Diagram for making a table for a circular saw

Before starting work, it is recommended to go through the preparatory stage. You should definitely make a drawing. This will make the design creation process easier. First, calculate the dimensions of the table, then transfer the data obtained to paper. The hole made in the structure must exactly match the dimensions of the saw. It all depends on the brand of equipment. Therefore, it is impossible to make a universal hole. The base must be stable and withstand mechanical loads well.

DIY table drawing for a circular table

It is unacceptable to overhang the structure to one side. The dimensions of the tabletop must be suitable for the sawing flow. The final option is determined based on individual desires. Some people work comfortably with a folding table or a product with small dimensions.

Drawing of a universal tabletop machine

An important point should be taken into account in the drawings. If you plan to leave tools or materials on the table while working, then the dimensions of the tabletop need to be increased to a square meter in area. A suitable size would be 120 by 120 cm. You should draw the drawing carefully and slowly in order to do everything correctly.

Table diagram for a circular table with a detailed description

Necessary materials

A homemade table can be made from wood

For such a table, wood, plywood or chipboard can be used. MDF and chipboard are also suitable. Some people prefer to choose steel or aluminum.

Steel plate table saw

It is not recommended to use plastic; it is completely unsuitable for a table of this purpose. If wood is chosen, then after completing the assembly the product should be treated with a special antiseptic composition. This will provide reliable protection from moisture and help avoid rotting.

To make a saw table yourself, you need to prepare the materials.

1. Selected raw materials for the base. The thickness should be 21 mm.
2. The timber required for the frame. An edged board 3 meters long with dimensions 50 by 150 mm is suitable. A total of 5 pieces are needed.
3. Dowels made of wood with dimensions of 10 cm. At least 12 pieces.
4. Wood glue.
5. Metal fasteners in the amount of 4 pieces.
6. Metal corners. 10 pieces are enough.
7. Self-tapping screws.

These elements must be prepared in advance and placed near the workplace.

Required Tools

In addition to materials, you should prepare tools.

Among them:

1. pencil and marker;
2. measuring instruments including meter and tape measure;
3. jigsaw;
4. manual frezer;
5. grinding machine;
6. sandpaper (must have medium or fine grain);
7. plane and drill;
8. screwdriver

You need to prepare everything in advance and keep it on hand throughout the entire process.

Manufacturing process: step-by-step instructions

Marking the place where the saw is attached to the table

Marking and fastening of stiffeners

Tabletop for a circular saw in finished form

To make a quality structure, you need to follow some tips. The process consists of several steps presented in the table.

Attaching the legs to the table

Attaching the saw to the tabletop

Fixing the start button

The design is completed and ready for use. When performing the described manipulations, it is important to remember to follow safety precautions. This also applies to any manipulations with a circular saw.

Regularly check the position of the table and its strength. The structure must be stable, without loosening.

An example of a manufactured work table for a circular saw

Table version for hand-held circular saw with lifting mechanism

First make sure the saw is securely fastened, only then turn it on. Do not hold the cut material with your hands. This will help prevent wood from hitting your face when the knots start to bounce. Additionally, it is recommended to use special safety glasses when working.

For safety, be sure to wear safety glasses

These simple tips will help you avoid injuries in the workplace.

Video: Table for a circular table made from scrap materials

A circular saw is a tool that no home craftsman can do without. This equipment is especially relevant for a country house or cottage. But working with a manual machine is not always convenient, and factory machines are quite expensive.

A way out of this situation may be to make this device yourself. The basis of this machine can be not only a hand-held circular saw, but even an electric drill or grinder.

Making a bed for a circular saw with your own hands is very simple. For production you will need the most regular lumber and quite a bit of time.

Before you think about the design of the upcoming machine, you need to calculate the load to which it will be subjected. The main thing in the bed is reliability and stability. For powerful production saws, the base is a welded reinforced metal structure. But you don’t need such a unit to use it yourself.

If you have just decided to make your own woodworking machine, then you need take into account the main parameters equipment. Since saws can be different, naturally, the design of the bed can also be different.

First of all you need determine the power of the tool. As a rule, for home use, equipment is chosen whose power parameters do not exceed 850 Watts. But, for example, when building a summer house or country house, it is often necessary to cut a very large amount of wood.

That is, more circular power is required. But experienced craftsmen do not advise buying saws where this figure is more than 1250 watts. Installing this equipment in a home workshop is absolutely not justified. And working on it will only increase electricity costs.

The greater the productivity of the machine, the more stable the base is needed. For professional circular saws, as a rule, a base is installed, welded from steel profile. Sometimes these frames are even concreted into the floor. Because vibration of the device can cause danger to life.

Technical features of circular machines

Depth of the proposed cut. The thickness of the material that will be processed on your machine depends on this parameter. This figure in semi-professional and professional machines ranges from 5 to 8 cm. For cutting boards and thick plywood, this is quite enough.

But working with logs on this machine will be inconvenient. In addition, you need to take into account that this characteristic is reduced in a homemade saw. The depth of the cut will be approximately 1 cm less. But this can be avoided if you provide in the table frame the ability to lower or raise the disk.

When making a tool with your own hands, you need take into account the frequency of its rotation. If you need a circular saw to prepare building materials, then this figure may be less. If a clean and even cut is needed, then the rotation speed is needed quite high. This is needed, for example, for making furniture.

But even in this case, there are certain nuances. This saw is not suitable for cutting plastic materials. Due to very high tool speeds the disk is warming up, and the plastic begins to melt.

Therefore, it is better to choose a device where the rotation speed is no more than 4500 rpm; in this case, the bed for a circular saw can be make from wood. The vibration of this machine is low and additional reinforcement of the table is not required.

Well, in the end, what needs to be considered is the location of the buttons and other controls on your machine. When assembling the saw with your own hands, do not forget that access to the control panel must be safe. This rule is even more important when the open part of the saw is located at the bottom of the tabletop.

In this design, it is best to place the panel with switches from the outside of the machine or make a rising tabletop. This design is also convenient for servicing the device. Then, when you have taken into account all the nuances and little things, you can begin directly assembling the table.

Making a circular saw with your own hands

The simplest version of the frame for a circular saw is a structure made of boards and thick plywood. Moreover, the tool is directly attached to the bottom of the stationary table top. A special slot is made in the table top for the saw.

The dimensions of the table can be changed according to how convenient it is for you to work on it. As an example, an average table is described, the height of which is 110−120 cm. But a lot depends on the height of the person working with the equipment. You can also change the length of the tabletop according to your wishes.

If you plan to work with boards that are longer than 2.6 m, then the cover on the frame will need more. In this case, changes must be made directly to the design and additionally add some supports(legs). Otherwise, the table will create strong vibrations.

For countertops usually plywood is used, which has a thickness of at least 5 cm. But you can also choose plexiglass or fiberglass slabs. But professionals do not recommend using chipboard; this material is not reliable enough.

Tools and materials for assembly

For a circular saw, it is imperative to provide guides. They help cut wood much more accurately. This design welded from angle steel and fixed to the lid with clamps.

It is not advisable to attach stationary guides, since in the future you will not be able to change their position.

To build a table you will need the following materials:

• sheet of iron;
• plywood sheet;
• timber measuring 50×50 mm;
• board size 50×100 mm;
• steel corner for guides;
• two clamps;
• hand circular saw.

You also need to first prepare all the tools that will be needed to assemble the table:

1. Screwdriver, electric drill.
2. Hacksaw or electric jigsaw.
3. Tools for measurements (tape measure, square, ruler).
4. Hand cutter or milling machine.

When everything is prepared, you can begin assembling the table itself. Sometimes craftsmen assemble countertops from unnecessary dining or kitchen tables. But this design is unlikely to last long. Therefore, it is much more reasonable to make all the design elements yourself. In this case, you can also take into account your personal needs.

Making a table top for a circular saw

Assembling the table begins with making the tabletop. The plywood sheet is marked so that the two edges of the lid are the same size as the edges of the iron sheet. Plywood is cut out using a hacksaw or jigsaw.

The edge of the cut can be processed with a milling cutter, but this operation is not necessary. Since the main parameter in the frame is reliability, and not an attractive appearance. The tabletop is rubbed “roughly” with sandpaper.

Mark the bottom of the tabletop slot for circular circle. To do this, you first need to measure the dimensions of the sole of the unit. The easiest way to do this is to unscrew the disk from the device and simply circle the desired part of the saw. These measurements are required to determine the seat.

Using a hand cutter, the bars are selected to a depth of approximately 0.9−1.1 cm. If you do not have a cutter, then this work can be done using a chisel, but it will take much more time.

Then, when the seat is made, try the saw on and, if necessary, adjust the recess. Mark the slot locations for the circle and fixing the fasteners. If you need the circle to rise and fall, then you need install the pendulum mechanism for the countertop.

In this case, the slot must be made in the shape of a truncated pyramid. In this case, the hypothetical top of the pyramid will be directed downward. Directly the frame for the lifting mechanism is best make from steel angles, which are welded to each other.

Making a table frame

The markings for fixing the transverse and longitudinal slats, which serve as stiffening ribs, are best installed on the underside of the tabletop. The planks themselves are made from timber. You will need:

• Two transverse parts, length equal to the width of the table top minus 7-9 cm on each side.
• Two longitudinal ribs, the size equal to the length of the lid minus 7-9 cm on each side.

Then you need make sockets for self-tapping screws. The slats must be fixed on the lid so that the tabletop extends 7-9 cm beyond the edges of the frame. The fasteners must be as reliable and durable as possible.

The first fastener should be installed approximately 40-50 mm from the edge of the rail. The distance between the screws is approximately 23−25 cm. All details need to drill through. The self-tapping screw is attached to the side of the lid so that its head is completely recessed into the wood.

First, the transverse ribs are secured. In order for the table top to be as strong as possible, the edges of the slats must first be apply wood glue. The structure is fixed with clamps, and without removing them, screws are screwed in.

Allow the tabletop to dry completely. Afterwards, the longitudinal slats are installed in the same way. Then the parts of the frame are pulled together, installing two fasteners on each side. Now the clamps can be removed.

Attaching the legs (supports)

The table legs are made of timber. The height of the supports is selected individually. In practice, it is most convenient to work at the machine when the tabletop located at hip level. Before fastening, each support must be planed so that the leg goes down to an angle from below. So, the area of ​​the base of the support should be slightly larger, in contrast to the area of ​​the top.

It is best to secure the legs using steel corners. They need to be pressed a little so that the base of the machine is in the “spacer”. This gives the table extra durability. Bolts with washers are used as fasteners; they are secured with their heads facing outward. Otherwise, during work you can be injured by the protruding parts of the fasteners.

The whole structure will be more stable if additional supports are tightened with diagonal slats. They are attached in pairs on each side of the machine.

Cover surface polished and varnished or use a steel sheet for coating, which is attached to self-tapping screws. At the very end, the instrument is attached directly to the prepared place.

On the table top you can make additional markings, it will help you cut wood smoothly and correctly. The control panel of the circular saw is located on the outside of the machine. As a rule, it is mounted on one of the table legs. That's all, your DIY circular saw is ready.

If you want to learn how to make a table for a circular saw with your own hands, then read the article.

It talks about the materials that will be needed during the project and the main steps in the process aimed at creating a simple but functional structure.

Materials and tools

A circular saw is a “serious” tool, when using it you must observe safety precautions.

A homemade table, which can be used as a tool stand, will allow you to carry out any manual work with greater accuracy and with less risk of injury.

Before you make a table, you need to spend time carefully planning its design.

It is best to create a detailed drawing containing pre-calculated dimensions of the future “stand”.

The tabletop on which the saw can later be installed should be made of either metal or hardwood. It is better to avoid using resinous wood.

The dimensions of the tabletop should be selected in such a way that they correspond to the planned sawing flow.

It is better to use wooden legs as a base. Plastic, even strong and high-quality, should not be used, since it is not the most reliable material for making a saw table.

In order for the made table to “function” to its full potential, it should be equipped with metal guides capable of moving material under the saw, or rather, under its working blade.

The optimal size of the bed, suitable for most typical sawing work, is one hundred twenty by one hundred twenty centimeters.

If you want to make your table wide and long, then take care of additional supports that will support its structure.

In particular, to give the product stability, it can be equipped with six legs rather than four.

The manual table is assembled using additional materials, including:

• wooden beams intended to form the frame of the structure;
• fastening dowels;
• wood glue;
• metal “corners” for attaching legs;
• nails and screws.

Tools that may be needed during the work:

• tape measure and a rigid construction ruler;
• electric jigsaw or hacksaw;
• a device having an installed milling tip;
• sandpaper (or sanding device);
• hammer and plane;
• screwdriver (or screwdriver).

Stages of making a table for a circular saw

Creating a saw table should begin with assembling its frame. To perform this procedure, you can use beams or edged boards, the size of which is fifty by one hundred and fifty millimeters.

The boards need to be knocked together into a single square or rectangular structure, which will serve as both a screed for the frame and a basis for attaching the legs.

The completed frame should be connected to the legs using special metal corners, dowels and screws during the process.

These devices must also be used to connect the assembled frame to the tabletop.

As an alternative, the frame elements can be connected not to each other, but to the legs of the future table. Some carpenters believe that this design is more durable.

The saw must be installed on an inverted bed. Thanks to this, its body and motor will be on the bottom, and the disk, otherwise called the working blade, will be on top.

The hole that allows you to deepen the saw blade into the table should be cut out in advance using a hacksaw or electric jigsaw.

It is important to remember the correct size of the hole, which will reliably “hold” the saw, ensuring the overall integrity of the structure.

Most circular saws have special metal parts that give them stability.

To fix the device on the tabletop, you should make four bars with sawn grooves and drill holes in them for long bolts.

After installing the saw, you should place the prepared bars on its carriage, thereby pressing the device to the bottom of the tabletop.

When attaching the support bars and saw to the tabletop, it is important not to damage the outer part of the bed so as not to create obstacles on its surface for the normal movement of the boards intended for sawing.

Once the saw is securely attached to the table, you need to turn the bed over and screw it to the tie frame.

At this stage of work, you should make sure that all work was carried out correctly and the device is functioning without problems.

Only then can material guides be attached to the table.

Additional Information

Carpentry work requires attention. If you want to make a high-quality and reliable table designed for installing a circular saw, then thoroughly prepare for the process and purchase all the necessary materials and tools.

After assembling the frame, be sure to install it on a flat surface and check that the tabletop of the structure does not overhang it in any direction.

It is better to install the table in the place where it will stand in the future, in order to eliminate possible problems associated with uneven floors.

If, due to an uneven floor, the table vibrates during operation of the saw, then the length of the legs should be adjusted using thick felt or rubber.

The tabletop of the product can be either monolithic or folding. To create a folding saw table, you will have to spend more time and material, and pay special attention to improving the reliability of the frame when disassembled.

The dimensions of the consumables used to create the table are determined experimentally. Ideally, the height of the structure should correlate well with the height of the owner of the saw.

The hole that will be made in the table top must match the dimensions of the specific saw available.

To extend the service life of all materials used, assembled into a single structure, they should be treated with special chemical solutions that can improve the performance characteristics of wood or metal (for example, protect their surface from corrosion, rotting, mold, etc.).

It is better to process wood or metal outdoors rather than indoors, so as not to be poisoned by active fumes.

Inspired by this article, you can make not only a reliable stand for a circular saw, but also a table where you can drink and eat when the whole family gathers.

The technology that underlies the creation of a dining table is in many ways similar to the diagram that can be used to put together a wooden table for a circular saw.

When carrying out work aimed at creating a table for a circular saw, it is important to remember safety precautions.