How to paint the outside of a village house. How to paint the outside of a wooden house for a long service life of the facade

The wooden facade of the house is extremely decorative. However, due to the specifics of the material, it requires more frequent care and maintenance than surfaces finished, for example, with plaster or glass. Use the recommendations on what and how to paint the outside of a wooden house so that it retains its strength and attractiveness for many years.

Photos of painted wooden houses from the outside

A wooden facade is one of the oldest methods of finishing the exterior of a house. The popularity of this solution continues unabated; a fashionable solution today is to make part of the façade from this material. Despite all the advantages of the method, natural material requires constant and careful maintenance. Impregnation and painting of boards with special products is necessary to protect them and improve their appearance. Consider effective solutions that will produce the desired results.

The best way to paint a wooden house outside: nuances of choosing a product

There are many products on the market for painting and protecting outdoor wood surfaces. Many of them, however, have properties that do not provide comprehensive protection for the facades of wooden buildings and at the same time do not provide the expected aesthetic appearance. For example, standard varnish used outdoors will not always provide the best UV resistance. Oils protect wood from the effects of atmospheric factors, but they are quickly washed out of the structure by rain, so the lubrication procedure must be repeated once every year or two. In addition, oil painted surfaces should not be exposed to direct sunlight.

Protection and decoration

Facade wood in the open air is constantly exposed to harmful sunlight, moisture, fungi, mold and pests, leading to the expansion of cracks, peeling of the coating, deformation and delamination of elements, which provoke serious damage to the wood. In addition, difficult conditions, such as winter frosts, acid rain and exhaust gases, cause wood to deteriorate much faster, losing its technical and aesthetic properties. Proper protection of wood with special means is required if you want to maintain its attractiveness and good physical shape for a long time.

What color to paint the outside of a wooden house: photos of fashionable solutions

Depending on what product you use to paint a wooden facade, it is possible to completely change the color or emphasize the natural colors of the wood.

What paint and varnish to paint the outside of a wooden house?

Facade elements and entire wooden surfaces should be treated with protective and decorative paint with properties that ensure a beautiful appearance and durability of the coating for many years. The protective layer of a suitable preparation must be flexible, stop the penetration of UV rays, prevent excessive peeling of the coating under exposure to the sun, and also prevent deep penetration of water into the wood. It is important that the product also provides resistance against the development of fungi, algae and mold. Walls on the north side are especially susceptible to their harmful effects. Consider two different preparations as a protective and decorative coating for a wooden facade. The first is BONDEX Extreme Decking 3 in 1 external use oil, and the second is Acrylic Enamel Bondex.

Lakobeyts 3 in 1 Bondex Extreme Wood Care

Lakobeits is a multifunctional varnish. With its help, you can protect wood from various atmospheric factors, and the finish of the painted surface lasts up to 8 years. The product penetrates deep into the wood, protecting it from mold and mildew, as well as from decomposition caused by light, water and frost, thus providing maximum protection. Lakobeyts 3 in 1 Bondex gives lasting color, decorating natural wood, emphasizing its natural pattern.

Water-based acrylic enamel Bondex Acrylic Enamel 12 years

Using acrylic enamel Bondex Acrylic Enamel for 12 years, you can protect the surface from exposure to atmospheric factors and mechanical damage, but, above all, completely change the color of the facade. The product provides an excellent effect after applying the first layer. In addition, the product is durable and flexible, so it will not peel or crack.

How to properly paint the outside of a wooden house?

Before you start painting the facade, the surface must be properly prepared. The scope of work depends on the condition of the boards. A preliminary inspection should answer whether it is enough to just sand the surface or whether any damage or defects should be corrected. Regardless of the condition of the facade, you should start by cleaning the boards with a brush and water and detergent. To remove dirt, use a spatula or machine. Only after this the facade should be treated with sandpaper or a grinding machine. It is then recommended to fill small depressions and remove loose wood particles. Damaged elements must be replaced with new ones. Before painting, surfaces must be dusted and dried.

Painting

After mixing, the product should be applied directly from the can using a brush or roller. For painting, you can also use a special spray gun if the application with such a tool is recommended by the manufacturer. Carefully go over the entire surface, including the boards and walls of the house, once along the grain of the wood. It is recommended to apply 2-3 layers of the product, observing the intervals intended for drying. A facade in good technical condition, which has been recently updated, only needs to be covered with 1-2 layers of decorative layer after sanding the surface. It is worth adding that wood paint must have the appropriate moisture content. In addition, painting work must be carried out in appropriate conditions, i.e. when the air temperature is not lower than 5°C and with a humidity that does not exceed 80%.

This way, the renewed and protected wooden façade will serve for many years. When you notice abrasion, fading, cracking or peeling of the coating, the outer walls of the wooden house should be repainted.

Regardless of whether the wooden building is new or old. The owners are faced with the question: how to paint the outside of a wooden house. To know which composition to choose, you need to understand the types of facade coatings and the features of their application.

Types of paints

The paint and varnish coating for exterior work is selected taking into account the location of the building. Since paint for a wooden facade has a set of characteristics.

Types of paints for woodwork:

Acrylic paints for exterior use. These are products for finishing wooden houses. They are used to paint the façade of the building, the veranda, and the windows outside the building. They are based on acrylic resins, antiseptics and fungicides. They protect the tree from negative influences. Acrylates are fireproof, odorless and have varying degrees of gloss. A wide selection of pigments and dyes allows you to create the desired shade.

Paint and color must be from the same manufacturer. When combining different brands, the quality of the coating may decrease (drying will slow down, bubbles will appear, color will change).

Alkyd paints for wooden walls. They are used for outdoor work. They are based on polycondensation resins. Paints for wooden facades have positive qualities: adhesion to wood, resistance to changes in air temperature, moisture resistance.

Alkyds often contain antifungal agents and flame retardants (substances that increase fire resistance), the presence of which plays an important role in painting a wooden house. Depending on the composition of the substance, the fire resistance of the coating varies. This indicator is clarified when purchasing paint.

The disadvantage of alkyd coatings is the limited choice of colors and quick drying (does not have time to penetrate deep into the timber). Their solvents have an average level of toxicity and flammability.

Oil paints are used for painting both outside and inside buildings. They are easy to apply and durable. The downside is that the coating takes more than 24 hours to dry.
An antiseptic based on an alkyd-acrylate mixture - this material is used both for painting and for impregnating the walls of a wooden house. Such glazing compounds preserve the texture and color of wood by creating a transparent coating.

The advantages of this material: dries quickly, penetrates deeply into the timber, delays ultraviolet rays after 2 applied layers. Impregnation renewal time is once every 2-6 years.

You need to choose which paint is best to paint the outside of a wooden house, taking into account the properties of the paint and varnish products.

Topcoat paints hide the grain of the wood. Therefore, they are used only for low quality boards. Valuable wood is varnished.

How to choose the right façade paint

What paint is better to paint the outside of a wooden house, and what mixture to use for interior finishing work. Factors to consider before purchasing coverage:

the place where the building is located;
climate of the region;
wood species;
deadline for repainting;
the presence of a previous layer of paint.

In addition, paint for woodwork must be manufactured taking into account GOST standards.

A good composition has:

UV resistance;
durability.

Color selection

Before deciding what color to paint a wooden house, pay attention to the style of construction. The outer and inner parts should be in harmony in design.

The facades of houses built in the classical style are not painted in bed colors. And for buildings with an English bias, bright and rich colors are not suitable.

When building country cottages, the style of the buildings is set by the contractor. Therefore, you have to choose what color to paint the facade based on basic recommendations.

Features of colors:

black color fades quickly;
dark colors are suitable for large-sized facades;
white color turns yellow;
light shades resist UV;
bright colors are annoying, but their tones look good in warm regions;
in cold climates, calm shades are used.

All facade paints have different film-forming components. The strength of the coating depends on the composition.

Painting the outside of an old house

Painting the outside of an old wooden house is not an easy task, since the walls already have a previous layer of coating. But if it is well preserved and not cracked, then you can paint over it. The main thing is to correctly determine the type of composition previously applied. And also select a new composition taking into account its features.

Wood is a living material, so processes occur in it that are characteristic of all living organisms. Under the influence of time and unfavorable weather factors (rain, sun, temperature changes), wood begins to age, become sick and deteriorate. Various microorganisms and insects that settle in the tree and gradually destroy its structure, as well as mold and mildew that form in damp places, also contribute to this negative process. As a result, the wood loses its original appearance, and the house turns into an unsightly gray structure. Painting the gray walls of a wooden house can solve the problem. How to renew aged wood, and what paint is best to paint it with, that’s what we’ll talk about.

An old wooden structure, unlike a newly built house, has already experienced the negative influence of time, bad weather and other natural factors. Therefore, the building, as a rule, has a very unpleasant appearance: the wood is cracked and darkened, the logs are covered with a network of small cracks, and in some places mold and mildew are blooming. In general, all the signs of old age and decline are evident. The best way to update an old building is by painting.

The difficulty of painting the outside of an old wooden house with your own hands is that the paint that was used to paint the building has become unusable; it peels off in places, peels off and hangs in pieces. It is impossible to repaint a building in this condition without preliminary treatment.

If you immediately apply fresh paint on top of all this “beauty,” then nothing good will come of it. A new coating will not save the house from further destruction; on the contrary, applied to an untreated surface, it can provoke increased crumbling of the wood. Therefore, before painting the outside of an old wooden house, it is necessary to carefully prepare and renew the surface.

The first step is to inspect the entire structure. If the inspection reveals logs that are rotten and severely damaged by fungus, they will have to be replaced. If the wood has not yet been damaged, areas covered with mold can be preserved. In this case, moldy areas are treated with an antiseptic.

A darkened surface can be bleached using special bleaching compounds. For the same purposes, ordinary cheap white is suitable, which will provide the same effect as more expensive special means. Large and small cracks are sealed with acrylic-based putties for exterior use. If the surface is to be painted in the future, putty of any color is suitable; under the varnish coating it is better to use products that match the wood.

Main stages of preparatory work:

Old peeling paint is cleaned off with a wire brush or spatula. You can also use chemicals designed to clean the surface. The mechanical method is faster, and the chemical method takes longer, but is more effective. After chemical treatment, the old log structure will look like new.
Uneven and rough surfaces are sanded to good light wood. To do this, use a grinder with a special attachment. If there are any unevenness left on the wood after sanding, they are smoothed out with coarse sandpaper.
Next, a primer is applied. To protect wood from the appearance of fungus and mold, it is better to paint it with a primer composition with antiseptic additives. It is advisable to use a primer that matches the color of the paint that will be used to paint the house.

To determine the best way to paint a wooden house, you need to get acquainted with the dyes that are suitable for painting the external walls of old wooden buildings.

There are several types of coloring compounds:

Oil paints have very good penetrating ability and are perfectly absorbed by wood. They are also highly resistant to any weather conditions.
Acrylate paints form an elastic coating on the surface that does not crack when wood shrinks during seasonal temperature fluctuations. The house will need to be repainted no earlier than ten years after the renovation.
Coating antiseptics reliably protect wood from various adverse weather conditions, and also prevent the formation of mold and rot.

Painting an old house has its own nuances. For a wooden structure that has not been painted, you can use any of the compositions listed above. If you need to update a previously painted house, then there are rules. Painting the outside of a wooden house using old paint can only be done with the same coloring compound that was used to paint it previously. Oil dye can be applied on top of oil paint; a structure painted with an acrylate composition is re-painted with the same compound.

A different type of paint can be applied to an old painted surface only if the previous dye is completely removed before repainting. If you bought a house that was already painted and don't know what kind of paint it was painted with, you can tear off a small piece of the old paint and roll it up. If the old coating easily rolls up, most likely the structure was painted with acrylate dye, but if the paint has crumbled, then you have an oil composition.

You can only paint dry wood, otherwise the paint will curl. Painting is best done in cloudy but not rainy weather. This is due to the fact that direct sunlight, when hitting a painted surface, contributes to the formation of stains.

Before applying the paint, it must be mixed thoroughly. For painting, it is better to choose a wide brush with natural or mixed bristles and dense padding. Work begins with the lower crowns of the frame, applying paint only in a horizontal direction to avoid smudges. To get an even and beautiful coating, you need to apply two or three layers. After repainting the house for the first time, you need to wait for the paint to dry completely, and only then proceed to the next layer.

Mistakes when doing work independently

A typical mistake when painting an old wooden structure is poor quality and improper preparation of the wood before applying the dye. Some unprofessional builders, wanting to quickly and cheaply repaint an old log house, perform only part of the necessary preparatory work, or even skip the preparation stage, which ultimately only increases costs. For example, when painting yourself, logs are often not sanded, as a result of which the antiseptic cannot penetrate deeply into the wood, which causes the fragility of the new coating.

When painting, it is very important to use the right tool and the appropriate paint composition, as well as strictly follow the paint application technology. It must be taken into account that the antiseptic used must be combined with the coloring composition. If the dye and primer are selected incorrectly, it is impossible to obtain the desired effect; in addition, such a coating will not last long.

Professional painting services

The right choice is to entrust the painting of your old wooden house to specialists who thoroughly know the technology and rules for performing the work. Experienced craftsmen of the Master Srubov company will carry out all the necessary work at a high professional level. We will determine the condition of the wood, thoroughly prepare the house for painting, and select the optimal paint composition in accordance with the individual characteristics of the wooden structure. We guarantee high quality painting and a long service life of the new coating. You can contact us using the coordinates in the section.

Finishing the facade by painting is always more profitable from a financial point of view than the same type of finishing used for interior decoration. The thing is that in addition to the external walls, the house also has partitions, which doubles the area of the surface to be painted. Therefore, even if the price of facade paint turns out to be slightly higher, less money will still be spent on exterior finishing.

However, before painting the outside of the house, you need to choose the right paint and prepare the surface, because the quality of the finish as a whole ultimately depends on these two nuances. In this article we will talk about the types and compatibility of facade paints and varnishes, their protective and decorative properties. We hope that our instructions will become the best assistant for those who cannot make a choice.

By and large, the standards impose requirements not so much on the paints themselves, but on the decorative films they form.

What is most important to them? The main indicator of good façade paint is the ability of the coating to maintain its integrity and original color for a long time under weather conditions.

Basic indicators

For façade paints, indicators such as vapor permeability and moisture resistance are very important, and in fact, achieving them from one material is quite problematic. And without this combination, the coating will not be durable, since moisture attacks it not only from the outside, but also comes out in the form of steam from the wall.

Note! When the steam has nowhere to go, it condenses and moisturizes the inner surface of the paint film. In winter, this moisture freezes, and when it thaws, it expands and peels off the paint. Keep in mind: the higher the vapor permeability of the structural material of the walls and their interior decoration, the higher this indicator should be for the façade paint.

So:

Paints with good vapor permeability are called “breathable”, and this characteristic is improved by introducing pore-forming additives into the paintwork composition.. But in order for the coating to be resistant to ultraviolet radiation, manufacturers have to use light-resistant film formers and pigments.

Peeling of paint from the base occurs not only due to its poor vapor permeability. The quality of the coating is largely determined by the properties of the primer, which must also be properly selected. The main rule here is that the primer composition should be made based on the same components as the paint.

To a question like: “How to paint the outside of a log house?”, we can safely answer that the best option is self-priming paint, which is both a primer and a paint.

Simply, when applying the first layer, it is diluted with a solvent to a more liquid state, and the surface is primed. The second layer is applied as usual.

Choice of colors

When choosing paint for the facade, it is also necessary to take into account such indicators as hiding power and consumption per 1 m2. In fact, these are two related concepts - the better the paint covers the base, the fewer layers will have to be applied, and accordingly, its consumption will be lower.

Advice! Before judging which paint is more cost-effective, do not look at the price tags, but compare the consumption indicators. If more expensive paint turns out to be more economical in terms of consumption, then, most likely, its use will be the most profitable from a financial point of view.

Lime based paints

The most environmentally friendly paints are lime and silicate options. It would seem that with the advent of newfangled paints and tinting impregnations, no one uses lime whitewash anymore. But, nevertheless, the facades of old buildings that are undergoing restoration are painted with them.

What is the reason for this preference:

But the fact is that lime paint does not contain polymers and does not form a film, which, in fact, is foreign to the walls. It conducts steam best, and is even a kind of antiseptic - just remember trees, whose trunks are still treated with lime to this day. But, of course, this does not mean that wooden walls can be painted with a lime-based composition.

Note! Substrates suitable for applying lime paints include lime-containing plasters and base substrates, as well as walls built from natural stone and concrete. The list of contraindications for them is as follows: all gypsum-based substrates (plaster, panels, gypsum plasterboard and gypsum fiber board), ceramic bricks, as well as old paint and varnish coatings that are not classified as lime.

The only disadvantage of lime paints is that they do not tint very well (see How to tint paint: choosing an option), and when painting it is almost impossible to achieve a uniform shade of the surface. In addition, over time it crumbles, and the facade quite often has to be repainted. Therefore, when we are talking not about a modest country house, but about a city residential building with a façade design claim, you will have to choose something else for exterior painting.
If you need to do the initial painting of a newly plastered house, or you need to repaint a façade that was previously painted with lime or cement paint, you can give preference to silicate compounds. They also contain lime, but along with it there are also 13-15% organic compounds, due to which the durability of the coating increases.

Indications and contraindications for the use of silicate paints are exactly the same as for lime paints - we have already drawn your attention to this. This type of paint is produced either in powder form, which must be mixed with liquid glass, or, as shown in the photo above, in finished form.
As a rule, it is just white paint. Before use, it is tinted as desired, but the colors are mostly pastel. Silicate compounds are quite caustic, and when applying such paint with your own hands, you must be especially careful and use protective equipment.

For the same reason, and also because it hardens quite quickly, it is applied with a roller (see), and not with a spray gun. You will get more detailed information on performing this work by watching the video in this article.

Aqueous dispersions

Everyone knows that water-based paints are mainly used for painting interiors. But imagine that for facades in many cases they should also be given preference. For example, on cement plaster, which is usually used for exterior work, it is generally not recommended to use alkyd and oil-based compounds.

The reason for this is the presence in these paints of fatty acids in an ethereal state, which, when exposed to the alkaline environment of the plaster, begin to collapse. So here the palm goes to dispersion-type paints.

Note! To the question: “What is the best way to paint a house made of timber from the outside?”, we will answer this way. If you want to get a color that matches the wood palette, it is better to give preference to tinted antiseptics, or, as they are also called, colored impregnations. They are both bioprotection and wood tinting. Well, to obtain any other color, we recommend the same dispersion paints.

Given such a wide range of applications, we will dwell on water-soluble paints in more detail. Many people do not understand the difference between the concepts “water-emulsion” and “water-dispersion”. And this is the same thing. An emulsion is a mixture of water and substances that do not dissolve in it.
And a dispersion is a suspension of the smallest solid particles that are present in the same emulsion. Typically, its role is played by cellulose, chalk or talc, which are included in the paint composition in order to obtain the desired thickness. Water-dispersion paints are also called water-soluble paints, since in a liquid state they are diluted with water.
Old generation paints, made mainly on the basis of butadiene styrene or polyvinyl acetate, were not only easily diluted, but also easily removed from the surface. Naturally, they were not used for facades. In contrast, coatings of modern paints made on the basis of acrylic resins, latex, and silicone have ideal mechanical strength.

When they dry, the film polymerizes, which is akin to the setting of cement, which is first easily diluted with water, and then forms a stone that becomes impenetrable to it. These compounds are sold white, but a color as rich as in the picture is obtained using concentrated tinting pastes added to the paint before application.

Synthetic paints and their compatibility

For painting facades, especially in large quantities, synthetic paints are often used, since they are much cheaper than others. These include oil compositions, although many are skeptical about them.

Meanwhile, modern technologies have long brought them to a fundamentally new level, and with the right approach to preparatory work, the result is unlikely to disappoint.

In any case, the question: “How to paint the outside of a frame house?” can be safely answered – with oil paint. The base surface in such a house is wood-polymer board (OSB) cladding, and this type of paint is perfect for it, as well as for any wooden surface.
In addition to oil paints, the following synthetic paints are used for facades: perchlorovinyl (CV), silicone (SO), pentaphthalic (PF), and paints based on chlorosulfonated polyethylene (CP). All of them are toxic, have a pungent odor, and therefore are only suitable for outdoor use.

Some of the synthetic paints can even be used at low temperatures, which is why they are used in large-scale construction that is carried out year-round. We will not go into the technological details of their manufacture, but we will pay a little attention to their compatibility. In cases where you have to renew old paintwork, this is very important.

In the table below, we will note which old coating cannot be applied to this or that type of paint, and will rely on the requirements of the current standard:

Among the variety of façade paints, I would especially like to mention siloxane-based compositions. They also represent an aqueous medium into which silicone resin is integrated, so they can rightfully be called water-based. The structure of silicone is similar to quartz sand, but there are also organic compounds attached to it.
This substance can equally well be attributed to both the inorganic and organic groups - that is, it is some kind of intermediate form. Among facade paints and varnishes, silicone paints occupy a very special place. They form a surface that does not absorb water to any extent, and, by the way, does not attract dust at all.

In terms of vapor permeability, they can easily “compete” with silicate paints. Most importantly, siloxane-based paints do not contribute to surface tension on plastered surfaces, which makes this coating the most durable.

Silicone dispersions adhere well to almost all types of surfaces and are also compatible with most organic and inorganic paints. Thanks to this, they are equally good for both primary painting of the facade and for its repair. The high cost is the only drawback of this option, but given the quality and durability of the coating, in the end, the consumer only benefits.

Today, many people ask the question: how to paint the outside of a wooden house?

There are many types of paints on the market, and not every type is suitable for wood.

In addition, correctly selected paint will extend the life of the walls of the house and protect them from pests and adverse weather conditions.

Color is also important, since painting can radically change the design of a house and make it both attractive and repulsive.

Types of paint

Today, many people prefer to build houses from wooden beams. This is due to the fact that wood is a living material, which not only has excellent thermal insulation properties, but also looks great.

However, wood also has a number of disadvantages, primarily its vulnerability to moisture, sunlight, fungi and various pests.

If the wood is not protected from these factors, then over time the walls of the house will dry out, crack and be affected by fungus.

Therefore, the question of what paint is best to paint the outside of a wooden house is very important, since the right paint will protect the house from external weather factors and significantly improve its design.

This is especially true for wooden houses built in conditions of high humidity (for example, near a pond).

Currently, there are three types of paints available on the market that are suitable for a wooden house.

The first type - antiseptics - is characterized by deep penetration into the wood (up to seven millimeters), thereby perfectly protecting the walls of the house from adverse weather conditions, fungus and mold.

Antiseptics are glazing (transparent) and covering (opaque). If the question is what is the best way to paint wooden walls, then it is better to choose glazing antiseptics.

Thanks to their transparency, the structure of the wood is preserved, and the design of the house becomes unique due to the color shade.

A house painted with glazing antiseptics looks great on the outside and is reliably protected from the outside.

The house will need to be repainted after about five years if glazing antiseptics were chosen, and after seven years if coating antiseptics were chosen.

Oil paints are very resistant to various atmospheric influences and are also deeply absorbed into wood.

Their disadvantages include long drying (more than a day) and a slight change in color over time (the surface becomes matte).

However, the color change is almost invisible when painted with light shades. Oil paint will last about six years on the walls (see photo).

Acrylate paints also have excellent weather resistance. In addition, when painting the walls of a house with such paint, you can be sure that it will last for a long time (up to ten years).

Acrylate paints give the wood the ability to breathe, thereby making the house more alive.

Due to the presence of acrylate, the paint is quite elastic, so when the house shrinks, it will move with the walls without collapsing.

If the question arises about how to paint the inside of a wooden house, then it is better to use ordinary water-based acrylic paints.

They are not very suitable for exterior use, but painting the inside of the house with these paints will be the best choice to improve the interior design of the house.

Today there are many options on the market for how to paint the inside of a wooden house.

Painting a newly built house

The question of how to paint the facade of a house with your own hands - that is, apply paint to the surface of the wall - usually does not arise, since almost everyone knows how to work with a brush.

But how to properly paint the outside of a wooden house is an interesting question, since there are nuances in the preparatory work.

First of all, you need to prepare the walls for painting, and this does not mean that you just need to brush off the dust with a brush.

It is advisable to do this using a spray bottle with water, since the liquid will absorb dust much better.

If there is mold or mildew on the walls, they need to be treated with a special product sold in stores.

If there is resin on the wood, you need to remove it - a spatula is perfect for this purpose. There may be many nail heads and screws on the walls of the house.

They need to be coated with a special metal primer, otherwise they will begin to rust over time.

After the wood has dried, you can begin painting. Almost everyone knows how to paint, however, there are several nuances.

It is better to carry out work in the warm season, but not under the scorching sun, otherwise the paint will dry too quickly.

It is advisable that the weather be calm, otherwise various debris may stick to the wet, fresh paint.

The paint must be stirred regularly in the jar so that its color is always the same. It should be applied to wooden logs exclusively in the longitudinal direction - just like an antiseptic.

The ends of the logs suffer the most from atmospheric influences, so they should be given the most attention. They should be soaked in several layers of antiseptic and paint.

The question often arises: what color to paint the outside of the house, because this greatly affects the appearance of the building?

Many stores offer consulting services on choosing a color to match the color of the roof and other home features, as well as the landscaping.

Often you can buy a small amount of paint in a store and experiment on an unnecessary board, comparing the results and choosing the option you like.

In many stores you can find samples of wood painted with a certain paint, and you can see the result immediately before purchasing.

How to paint an old house?

The question often arises: how to paint the outside of a house if it is already many years old and the old paint no longer holds?

In this case, painting will not only significantly improve the appearance of the building, but will also protect the wooden walls and extend their life.

To properly paint an old wooden house, you need to take into account some nuances.

The first step is to use the same type of paint as last time, or to completely remove the old paint from the entire building down to the depth of the wood.

This process is quite labor-intensive and complex, so it is much easier to determine what the house was painted with last time.

This can be difficult to do if another person did the painting. If the house was painted with oil paint, it is easy to determine visually - it is cracking in cells or across the wood fibers. Acrylate paint cracks along the grain and feels like leather.

You can also try rolling a piece of old paint into a roll. If this was possible, then the house was painted with acrylate paint, and if a piece crumbled, then with oil paint.

Glazing antiseptics become thinner over time; the coating can be renewed with the same composition of a darker color.

Before painting begins, old paint must be removed from the walls. It is better to do this with a metal brush.

You can use chemical cleaning agents that will preserve the structure of the wood much better.

However, this process is quite long and labor-intensive, so if you have a lot of free time, you can use a gel remover to remove old paint; if not, then the walls need to be cleaned mechanically.

If the old paint is holding strong, you can leave it. Then you need to clean the walls from dust and dirt, preferably using a sprayer.

If mold or mildew is present, the affected areas must be thoroughly cleaned. If there are rotten boards in the wall, it is better to replace them with new ones.

For better adhesion of the new paint to the wood, the walls can be treated with an alkaline detergent. If necessary, you can treat the walls with sandpaper.

An antiseptic primer must be applied to old walls, paying special attention to the ends of the building.

This will extend the life of the wood and protect it from mold and fungi. Painting the walls is carried out using the same method as for a new wooden house.

The most popular paints today are from the Finnish manufacturer Tikkurila. This company has been a leader in the paint and varnish market for many years.

Good quality is offered by the Finnish company Pinotex and the Slovenian company Belinka. By purchasing paints and antiseptics from any of these companies, you can be sure that the house will be painted with a high-quality composition that will last for many years.

Painting an old or newly built wooden house is quite simple.

To do this, you need to take into account some of the nuances of the process, purchase high-quality paint and primer antiseptic, and thoroughly clean the walls from dust, mold and resins.

With proper preparation and painting, a wooden house will acquire an attractive appearance and will be protected from negative atmospheric influences for many years.